XKM/JTS2系列端子，端子中的“变形金刚”

当前位置：

产品中心

接线盒

接线端子

零线端子

多用途端子

开关端子

T接端子

绝缘穿刺线夹

配线器材

XKM/JTS2系列端子，端子中的“变形金刚”

如果您有任何问题可以联系我们！

联系我们

产品详情
返回

一、产品概述 Genera

XKM/JTS2系列多用途接线端子系专为各类电控配电设备，成套装置及组合式终端电器箱中配线而设计。产品的额定绝缘电压690V, 额定工作电压380V，进线端连接导线的******截面为120mm2，出线端按连接回路数的多少以及接线方式的不同，分别可连接导线的截面为2.5-120mm2。该产品结构新颖独特; 接线牢固可靠；使用灵活方便。可作各类电气装置中母线排、大电流端子、接零、接地端子、等电位端子之用。
XKM/JTS2 series terminal block is designed for wiring in electric control distribution equipment, complete equipment and terminal apparatus , etc.. The product is of rated insulation voltage 690V, rated working voltage 380V, max section of inlet terminal conductor 120mm2. According to different circuit number and connection ways, the section of outlet terminal reaches 2.5-120mm2. This product structure has advantages of original structure, firm connection
and flexible operation. In addition, it can also serve as electric equipment busbar, heavy-current terminal block, neutral terminal, grounding terminal, equipotential terminal, etc..

二、结构特点 Structure features

XKM/JTS2多用途端子由导电件、绝缘座和防护罩组成，体积小巧，结构可靠，其进线端既可以将导线直接接入(简式连接)、也可用OT端头(线鼻子)连接(板式连接)，亦可接入宽度≤30MM的铜排，其出线端则统一为筒式连接。压线螺钉的底部为特制的球形压线时不仅不伤导线，而且对导线具有足够大的挤压力，接触更可靠。
XKM/JTS2 series terminal block cover, with compact volume and reliable structure. Through its inlet terminal, the conductor can be connected directly (simple connection), or connected withOT lug (panel connection), in addition, this
inlet terminal also allows the copper busbar not exceeding 30MM to enter, and all connections at the outlet terminal are of the barrel type. The bottom of crimping screw is spherical shape, which takes no damage over the conductor when crimping, and even brings big enough extrusion force over the conductor and have more reliable contact.

三、安装与使用 Installation & Use

本系列产品提供了两种安装方式：1、直接在底板上打孔安装(仅限外形尺寸为78×63×36，安装螺钉为M5)；2、安装在TH一35导轨(顶帽轨)上。接入导线建议使用多芯线，导线插入盲孔时要确认插到底后方能往下拧螺钉，以防误接。当接入导线截面较小，且导线绝缘能塞进接线孔时，在确保导体接触可靠的前提下，允许绝缘进入接线孔。当使用时或线路进行维护需要打开防护罩时，只需在防护罩的搭勾处向内用手轻捏便可取下，亦可用螺丝刀从搭勾处插入，轻轻旋转即可取下。装防护罩时要在四个搭勾处向下施压，确保每个搭勾全部卡在孔内方可。
There are two ways to install this product: 1. Drill a hole in the bottom plate directly and install (only for the product whose outline size is 78×63×36，and mounting screw is M5)； 2. Install it on TH一35 rail (top-hat rail). It is suggestedthatmulti-corewireshould be used for connecting conductors. And only the conductor is inserted into the bottom of blind hole thoroughly, could the screw be tightened down to prevent wrong connection. When conductor section is small, and conductor insulator can be stuffed into the connection hole, the insulator is allowed to enter into the connection hole on the premise of reliable contact of conductor. If the protective cover is required to open, pinch the lap of protective cover inward slightly, insert a screwdriver into the lap, then rotate it slightly. When to assemble the protective cover, apply the pressure to four laps, and make sure every lap into the hole.

四、订货须知 Notification of order

订货时请注明型号(或订货号)和数量即可。 XKM/JTS2系列端子，可定制非标各种进线和出线平方线数。
When ordering, please indicate the model (or order No.) and quantity. The inlet and outlet wire size of XKM/JTS2 series terminal block can be customized.

五、安装尺寸 Mounting Dimension