| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
六、XKM(1kV)技 术参数 T echnicald ata | |||||||||||||||||||||||||||||||||||||||
|
合理选型,把调整平直的导线放入线夹的正确位置后先用手拧紧 Choose the right connector to fit. Put the straight wires in the right places then screw them tightly by hand. |
||
用绝缘套筒扳手均匀拧紧力矩螺母 Tightn the nuts equally with the insulating gloves and spanner. |
||
直至拧断力矩螺母即可 Don’t stop screwing until the cap of the moment nut is screwed off . |
||
八、应用 Application | ||
1. 用传统方法安装并固定好主干线电缆 2. 在需做分支的部位剥开主缆外护套0.6米(切勿破坏相线绝缘层) 3. 选与电表箱间距相符的分支电缆(不超过3米)并剥离两端端头护套 4. 纵向依次安装分支器(分支器间距≥10cm) 1. Installing and fixing main cable in traditional way. 2. Stripping outer insulator of main cable for 0.6m(don, t destroy insulaton layer for phase). 3. Choosing branch cable(not more than 3m) whose distance is the same as electric meter box, and strip insulator at two terminals. 4. Installing the separator vertically by turns (the sepatator distance is more than 10cm). | ||
绝缘皮上穿刺效果 Piercing effect of insulated coat |
线芯上穿刺效果 Piercing effect of wire core |