 |
连接示意图 Schematic diagram of connection |
 |
XKM/TTDC... 连接器connecto |
 |
分支插头 Socketoutlet adapte | |
一、产品概述 Genera |
1. 用于暂时停电或短路的线路的分支连接。 2. 主线:绝缘铜或铝导线 3. 带电或停电作业 4. 穿刺线夹主体采用高强度,抗机械变化和气候变化的绝缘材料制成。 5. 配有紧固力矩螺母的螺钉经抗腐蚀处理(可根据用户要求提供不锈钢螺钉),力矩螺母使安装更简便、安全、快捷,其恒定穿刺压力可确保电缆连接达到需要的电气效果。 6. 支接侧装有保险螺柱、卡口式连接,其端头钻孔,用于电压测量试验,确保接头用帽盖绝缘。该盖帽装有可拆除指示以核对相线和中性线。 7. 防水系统保证绝缘,可在水中耐受电压6KV无击穿现象。 ■ Used for branch connection of temporary power failure or short-circuit line ■ Main line: Insulated copper or aluminum conductor ■ Live-line work or power-cut work is allowable ■ Main body of connector is made of high strength insulating material that anti mecha-nical change or climatic variation. ■ The screw that is equipped with fastening torque nut is anti-corrosion treated (stainl-ess screws are available at request), the torque nut enables the installation to be much simple, safe and quick, its constant puncturing pressure guarantees best electrical effect for the cable connection. ■ Branch connection side mounting has safety stud bolt and bayonet coupling, the end is bored, for voltage measurement test, make sure that the adapter should be insulated by cap. This nut cap is equipped with demountable indicator for verifying the phase line and neutral line. ■ The waterproof system shall guarantee insulation, it is able to withstand voltage of 6KV in water without breakdown phenomenon. |
 |
力矩螺母 Torque nut | | |