 |
连接示意图
Schematic diagram of connection |
 |
| XKM/NTD150-150 |
 |
| XKM/NTD95-95-1/XKM/NTD 50-35 | |
| 一、产品概述 Genera |
1. 用于从低压架空裸线（铜或铝）支接到绝缘电缆或预先剥皮的导线（铜或铝）。
2. 主线：架空铜或铝裸线 3. 支线：绝缘铜或铝
4. 穿刺线夹主体采用高强度，抗机械变化和气候变化的绝缘材料制成。
5. 紧固螺钉经抗腐蚀处理，并配有紧固力矩螺母，使安装更简便、安全、快捷，恒定穿刺压力可确保线夹达到******电气效果。
6. 用于绝缘电缆或预先剥皮导线的支线接头具有防水功能，可将支线置于主线的任一侧。
7. 主线和支线分开紧固，整个穿刺线夹不存在可能松动部件。
8. 接在裸线侧的宽接触传输按不同型号用以下材料制成：
—— 铝合金用于铝裸主线(AF型) —— 铜合金用于铜裸主线(F型) —— 镀锡铜合金(EF型)
1. Used for branch connection of LV aerial bare line (copper or aluminum) to insulated cable or pre-peeled conductor (copper or aluminum).
2. Main line: Aerial copper or aluminum bare line
3. Branch line: Insulated copper or aluminum
4. Main body of connector is made of high strength insulating material that anti mechanical change or climatic variation.
5. The screw is anticorrosion treated, and is equipped with fastening torque nut, the torque nut enables the installation to be much simple, safe and quick, its constant puncturing pressure gua-rantees best electrical effect for wire clamp.
6. Branch line adapter for insulated cable or pre-peeled conductor has property of waterproof, the branch line can be set on any side of main line.
7. Main line and branch line should be tightened separately, the whole connector should have no parts that would loosen.
8. The broad contact transmission connected on the bare line side is made of the following material according to different models:
——Aluminum alloy for aluminum bare main line (AF type) ——Copper alloy for copper bare main line (F type) ——Tin-copper alloy (EF type) |
 |
 |
可左支接或右支接
It can be branched on the left or right side |
力矩螺母
Torque nut | | |
