| ||||||||||||||||||||||||||||||||||||||||||||
| 一、产品概述 General | ||||||||||||||||||||||||||||||||||||||||||||
| XKM/JH27系列接线端子由绝缘基座、接线框、防护罩三部分组成，接线框由导线夹、螺钉、螺母和支承框组成，导线夹与导线接触面呈包容形的犬牙交错结构，具有接触面大、压接可靠的特点，通过不同形状的导线夹的相互组合，使其不仅具有目前使用的接线端子的 一般功能，还可派生出大电流分线端子、干线"T”接端子和母线排接线端子。满足了所有电控配电、成套装置中的大截面导线连接和导线的分接等各种用途。由于导电部件结构独特，使得导线的接入更为方便快捷，使用时只需剥去导线绝缘而无需对线端做任何处理便可接入，再也不需一大堆工具伴其左右。使用便捷、工效倍增。该产品的绝缘材料选用优质增强工程塑料，该材料具有优异的电气性能、耐燃性和抗腐蚀性及绝佳的机械性能，具有较强的抗振动和抗冲击性能，适用范围广。 XKM/JH27 power distribution block is composed of insulator foot, wire frame, protective cover. The wire frame is made up of clamp, screw, nut and supporting fixture. A closed interlocking structure is formed between clamp and conductor contact surface, with large contact surface and reliable crimping. Through combinations of different shapes of clamps, it can serve as heavy current terminal connector, trunk line T -type connector and busbar connector. It can be applied to large-section conductor connection and branch connection in all electric control distribution equipment and complete equipment. Due to original structure of conductive parts, it is more convenient for conductor to enter only to strip the insulator of conductor, and not to do any treatment for wire terminal Conductor. Therefore, it fully shows high efficiency. Its insulation material is made of the first-class reinforced engineering plastic, which has perfect electric performance, flame resistance, anti-corrosion and mechanical performance, vibration prevention, impact resistance as well as wide application range. | ||||||||||||||||||||||||||||||||||||||||||||
| 二、主要技术指标 Main technical parameter | ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| 额定电压/电流/截面Rated voltage/current/section: 1000V/160A/95mm2 压线螺钉Crimping screw:M10 拧紧力矩Tightening torque (Nm):20 剥线长度Striping length(mm):30 安装螺钉Mounting screw:M5 |
| ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| 额定电压/电流/截面Rated voltage/current/section: 1000V/250A/150mm2 压线螺钉Crimping screw:M10 拧紧力矩Tightening torque (Nm):20 剥线长度Striping length(mm):30 安装螺钉Mounting screw:M5 | ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| 额定电压/电流/截面Rated voltage/current/section: 1000V/400A/240mm2 压线螺钉Crimping screw: M12 拧紧力矩Tightening torque (Nm):40 剥线长度Striping length(mm): 30 安装螺钉Mounting screw:M6 |
| ||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||
| 额定电压/电流/截面Rated voltage/current/section: 1000V/630A/300mm2 压线螺钉Crimping screw:M16 拧紧力矩Tightening torque (Nm):50 剥线长度Striping length(mm):30 安装螺钉Mounting screw:M6 * 注：一路进，六路出的分线端子，其中二路在进线端出线。N=1，2，3，4，5；括号内数字为加装防护罩后的尺寸。 Note: For one-inlet, six-outlet branch terminal, the two-circuit leads the wire out from the inlet terminal. N=1, 2, 3, 4, 5; the digits in bracket are the sizes after protective cover is mounted. | ||||||||||||||||||||||||||||||||||||||||||||
| 三、安装与使用 Installation & us | ||||||||||||||||||||||||||||||||||||||||||||
| XKM/JH27系列接线端子采用螺钉(非导轨)安装方式，牢固可靠。使用时只需旋松螺钉，抬起导线夹，插入导线拧螺钉，盖上防护罩即可。 This series of terminal block is installed with the screws, firm and reliable. When using, only to loosen the screw, put up the clamp, insert the conductor, tighten the screw and, shut the protective cover down. | ||||||||||||||||||||||||||||||||||||||||||||
| 四、订货须知 Notification of order | ||||||||||||||||||||||||||||||||||||||||||||
|
