 |
连接示意图
Schematic diagram of connection |
 |
单力矩螺母
Single-torque nut |
 |
双力矩螺母
Double-torque nut | |
| 一、产品概述 Genera |
1. 用于从低压架空裸线（铜或铝）支接到绝缘导线（铜或铝）。
2. 主线：架空铜或铝裸线 3. 支线：绝缘铜或铝
4. 穿刺线夹主体采用高强度，抗机械变化和气候变化的绝缘材料制成。
5. 紧固螺钉经抗腐蚀处理，并配有紧固力矩螺母，使安装更简便、安全、快捷，恒定穿刺压力可确保穿刺线夹达到******电气效果。
6. 绝缘穿刺接触（用中性油脂）在支接侧搭接，按不同型号用以下材料制成：
——铝合金（AF型） ——铜合金（F型） —— 镀锡铜合金（EF型）
7. 采用密封防水结构的支线端盖，可防止水侵入支接导线，可根据需要左侧或右侧分支
1. Used for branch connection of LV aerial bare line (copper or aluminum) to insulated conductor (copper or aluminum).
2. Main line: Aerial copper or aluminum bare line
3. Branch line: Insulated copper or aluminum
4. Main body of connector is made of high strength insulating material that anti mechanical change or climatic variation.
5. The screw is anticorrosion treated, and is equipped with fastening torque nut, the torque nut enables the installation to be much simple, safe and quick, its constant puncturing pressure guarantees best electrical effect for connector.
6. The insulating puncture contact (applies neutral lipids) is lap jointed on the branch connection side, is made of the following material according to different models: —— Aluminum alloy (AF type) ——Copper alloy (F type) ——Tin-copper alloy (EF type)
7. End cap of branch line adopts waterproof sealing structure, it prevents water from entering into the branch connected conductor. It can be branched on the left or right side according to the demand. |
 |
 |
力矩螺母
Torque nut |
分支可左可右
The branch can be on the left or right side. | | |
